Graham & Sleevit Twin Spool Unwind

The Graham & Sleevit Twin Spool sleeve unwind system is a compact design in its horizontal form, but can also be supplied in vertical form where space is at a premium. It is used to store an additional full roll of sleeve material alongside the roll that is being fed to the sleeve applicator.

Low level and end of reel alarms are fitted to the Graham & Sleevit Twin Spool sleeve unwind system to alert the operator when the sleeve reel is almost empty and stop the process if the sleeve roll ever runs out. An integral splice table enables the splice to be made with minimal down time.

The Graham & Sleevit Twin Spool sleeve unwind system incorporates a small air box material reservoir at its out-feed to reduce the sleeve material tension to a minimum as it is fed into the sleeve applicator.

  • Provides continuous sleever operation during supply roll changes
  • Allows for label splicing in motion
  • Incorporates an air box material reservoir for minimal in-feed material tension
  • Low label roll detection with alarm and light to notify operator when roll change is needed End-of-roll detection with alarm, light, and sleeve applicator inhibit function
  • Unwind Maximum Diameter: 600 mm [23.6 in]
  • Unwind Core Diameter: 127 mm [5 in] standard
  • Electrical: 230 VAC, Single Phase
  • Weight: 210 kg [462 lbs]
 

Contact Us For More Information