Stanford DM16 Shrink Sleeve Inspector

Don’t throw out bad rolls - Doctor them!

The DM16 has many advanced features to simply this process. A manual inspection button allows the operator to return the detected defect to the splice table automatically, while automatic inspection for UV, seam integrity, and flags will return the defective location to the splice table.

Designed specifically for shrink-sleeve applications, the DM16 compliments Stanford’s Seamer line. To save valuable floor space, we designed the most compact vertical seam inspection machine on the market. The DM16 requires only two square feet for installation. Fully-cantilevered, with a intuitive touchscreen, the DM16 is designed for fast production with speeds up to 500 mpm (1,640fpm).

  • Manual inspection button with return-to-defect
  • Intuitive touchscreen controls with unlimited recipes
  • Electronic rewind oscillation up to 20 mm [0.75”]
  • Cantilevered compact design
  • Reversible over/under winding
  • Automatic inspections for seam integrity, solvent presence and splice/flag detection.
  • Two-motor smart AC Vector drive system
  • On-board drive based PAC Control
  • Internet based remote diagnostic with WiFi capability
  • Minimum Layflat Width: 50mm [2”]
  • Maximum Layflat Width: 406 mm [16”]
  • Maximum Web Speed*: 500 mpm [1,640 fpm]
  • Maximum Unwind Diameter: 610 mm [24”]
  • Maximum Rewind Diameter: 610 mm [24”]
  • Tension:0.26 Kg/Cm [1.5 PLI]
  • Total Minimum Tension:1.58 Kgf [3.5 lbf]
  • Shaft Options:76.2 mm,127 mm,152 mm [3”,5”, 6”]
  • Machine Options:UV Detection, Bubble Detection, Flag Detection,Splice Detection,Strobe Light

* Max speed is a function of the material characteristics (including COF, coatings, ink adhesion, curing, and drying), gauge bands, tension and web width


Contact Us For More Information