Stanford AccraSeam FC Shrink Sleeve Seamer

The World’s Most Advanced Seamer

The AccraSeam™ FC is a servo-driven, fully-continuous shrink sleeve seamer with two position unwind and rewind turrets. With flying splices at full speed that only generate four meters of waste, the ASFC allows for maximum production without compromise. This equates to 3.4X more finished rolls in a seven man hour day than a single shaft seamer.

The AccraSeam™ FC is equipped with technology to increase production time and quality,such as a fully automatic table with seam positioning, which allows the operator to enterthe layflat width and seam location. The machine will then automatically adjust. These values can be changed while the machine is running, and stored in a recipe for easyretrieval, virtually eliminating the large amounts of waste that can be created when settingup your layflat.

Also included is a layflat quality check system with proprietary software that provides on machine printed reports for each roll. This gives your customer, brand owner, or co-packerthe quality assurance they demand.Accraply engineers a large selection of Stanford Doctor Machines®, a complete lineof duplex differential slitter rewinders and shrink sleeve finishing equipment, as well as customized equipment.

Image(s) & Video

  • Fully-continuous, with full speed splicing
  • Fully automated layflat adjustment with automatic seam positioning
  • Two-position, servo-driven continuous operation turrets, with servo-driven nip
  • Forms and seals PVC, PETG, OPS and PLA films
  • Ultrasonic sleeve-width measuring device provides precise layflat monitoring
  • Intuitive touchscreen controls with unlimited recipes
  • Electronic turret positioning
  • Internet based remote diagnostic with Wi-Fi capability
  • Minimum Layflat Width: 50mm [2”]
  • Maximum Layflat Width: 305 mm [12”]
  • Maximum Web Speed*: 400 mpm [1,312 fpm]
  • Maximum Unwind Diameter: 610 mm [24”]
  • Maximum Rewind Diameter: 610 mm [24”]
  • Tension: 0.26 Kg/Cm [1.5 PLI]
  • Total Minimum Tension:1.7 Kgf[3.75 lbf]
  • Shaft Options: 76.2 mm,127 mm,152 mm,254mm [3”,5”, 6”, 10”]
  • Solvent Options:Table Needle [Standard], Table Wick, Rear Wick, Rear Needle
  • Machine Options: Automatic Flagging, UV Detection

* Max speed is a function of the material characteristics (including COF, coatings, ink adhesion, curing, and drying), gauge bands, tension and web width.

Contact Us For More Information