Label Unwind and Splicing Systems

Designed for higher speed production environments where optimum production efficiency is assured by utilizing manual splicing techniques for continuous label application. Our Label Unwinds offer ergonomic, trouble-free, reliable equipment which can be adapted to any pressure-sensitive labeling system where the minimum or no downtime is a prime objective.

Consisting of two 500mm diameter vertically-mounted reels with variable- speed powered unwind. A label reservoir system and splicing table are incorporated which allow continuity of label-feed whilst the manual splicing operation is carried out. The web is turned to a vertical attitude via a rotating module. The sequencing of the system is controlled by a PLC.

When a label roll gets low, the system alarm warns the operator that service is required. The operator can then jog the rest of the label roll into a holding bin, providing a buffer to feed the applicator while splicing a new roll. The jog stops when the end of the roll appears on the work table. Using these features, a trained operator can splice-in a new roll in seconds and never stop your production line.


  • Production Rates: Maximum linear speed 110 metres per minute
  • Electrical Requirements: DC drive 110 or 240 volt
  • Product Capacity: Maximum Diameter of 500 mm
  • Label Capacity: Maximum Web Width of 150 mm


  • Roll Diameter: 20”
  • Roll Width: 6” (9.5” optional)
  • Speed: Variable speed to 3,000 inches per minute

Contact Us For More Information