Graham & Sleevit ShrinkMaster R1500 Heat Tunnel

The ShrinkMaster 1500 shrink tunnel is one of the most compact recirculating shrink tunnels available, taking up only 1500mm of line length and is ideal for the shrinking of full body decorative printed sleeves. It has a single heat zone, under PID control, which together with its 16 fully adjustable fan-tail nozzles ensures accurate temperature control, and allows a heat profile to be created within the tunnel to provide efficient sleeve shrinkage.

The ShrinkMaster 1500 shrink tunnel is ideal for medium to high speed use on containers such as jars or large tubs. It is able to shrink the sleeve without appreciable heating of the container, thus making it suitable for chilled or frozen foods. Its close temperature control and good carcass insulation make the ShrinkMaster 1500 shrink tunnel an efficient solution to shrinking Sleeve Labels and pre-heating glass containers prior to Sleeve Label application.

‘Stand-alone’ operation of the ShrinkMaster 1500 shrink tunnel is possible, but its full capabilities are best used when it is integrated with one of the Sleevit range of SleeveMaster sleeve applicators.

Container Height min/max: 50 mm/300 mm [1.97 inch/11.81 inch]
Container Diameter min/max: 20 mm/150 mm [0.79 inch/5.91 inch]
Electrical Requirements: 415 VAC, 3 Phase, 26 Amps

  • Ideal for hi-speed, tamper-evident shrinking up to 18 Kw energy
  • Used for decorative sleeves on plastic and preheated containers
  • Fully Insulated & Guarded Stainless Steel Chassis
  • Unique 1 Zone digitally Air profiled design
  • Low running cost. (26 amps / phase max current)
  • 16 fully adjustable directional fantail nozzles in two banks
  • Up to 75% re-circulatory air flow
  • Supplied complete with stainless steel fixed height stand
  • Can be used in series for more complicated shapes
  • Tunnel Type: Hot Air
  • Conveyor Height min/max: 900 mm/1000 mm [35.34 inch/39.37 inch]
  • Container Height min/max: 50 mm/300 mm [1.97 inch/11.81 inch]
  • Container Diameter min/max: 20 mm/150 mm [.79 inch/5.91 inch]
  • Nozzles: 16 Nozzles length: 140 mm [5.51 inch]
  • Electrical: 415 VAC, 3 Phase, 26 Amps
  • Weight: 350 kg [771.62 lbs]
  • Steam Requirements: N/A

Contact Us For More Information