Graham & Sleevit ShrinkMaster R750 Heat Tunnel

The ShrinkMaster 750 shrink tunnel is one of the most compact recirculating shrink tunnels available, taking up only 750mm of line length. It has two individual heat zones, each under PID control, and having two fully adjustable fan-tail nozzles to ensure accurate temperature control and efficient sleeve shrinkage.

The ShrinkMaster 750 shrink tunnel is ideal for medium to high speed use on containers such as jars or large tubs. It is able to shrink the sleeve without appreciable heating of the container, thus making it suitable for chilled or frozen foods. Its close temperature control and good carcass insulation make the ShrinkMaster 750 shrink tunnel an efficient solution to shrinking Sleeve Labels and pre-heating glass containers prior to Sleeve Label application.

‘Stand-alone’ operation of the ShrinkMaster 750 shrink tunnel is possible, but its full capabilities are best used when it is integrated with one of the Sleevit range of SleeveMaster sleeve applicators.

Container Height min/max: 50 mm/300 mm [1.97 inch/11.81 inch] Container Diameter min/max: 20 mm/150 mm [0.79 inch/5.91 inch] Electrical Requirements: 415 VAC, 3 Phase, 17 Amps

  • Ideal for hi-speed tamper-evident shrinking up to 12 Kw energy
  • Can be used for simple decorative sleeves
  • Fully Insulated & Guarded Stainless Steel Chassis
  • Unique 2 Zone digitally controlled design
  • Low running cost. (18 amps / phase max)
  • 4 fully adjustable directional fantail nozzles
  • Up to 75 % re-circulatory air flow
  • Supplied complete with stainless steel fixed height stand
  • Can be used in series for more complicated shapes
  • Tunnel Type: Hot Air
  • Conveyor Height: 900 mm/1000 mm, min/max: [35.34 inch/39.37 inch]
  • Container Height: 50 mm/300 mm, min/max: [1.97 inch/11.81 inch]
  • Container Diameter: 20 mm/150 mm, min/max: [.79 inch/5.91 inch]
  • Nozzles: 4
  • Nozzle length: 300 mm [11.81 inch]
  • Electrical: 415 VAC, 3 Phase, 17 Amps
  • Weight: 250 kg [551.16 lbs]
  • Steam Requirements: N/A

Contact Us For More Information