Graham & Sleevit Moisture Removal System

The Graham & Sleevit Moisture Removal system is a compact design that has been developed to provide in-line moisture removal from the exterior surface of containers, which is an essential requirement where sleeve application may be impeded by residual moisture on the container surface and can also be used whenever post steam-tunnel drying is required.

The Graham & Sleevit Moisture Removal system is easily incorporated into any Accraply shrink sleeve system. Because it is an independent module, the Graham & Sleevit Moisture Removal system can be installed on any new or existing line, pre or post-fill, and will remove filler overspill or process condensation as required. A maximum of eight air knives can be fitted to the Graham & Sleevit Moisture Removal system. They have a wide range of positional adjustment and easily adjustable outlets to enable containers from 30 mm to 400 mm in height to be processed. The air supply for the Graham & Sleevit Moisture Removal system is provided by two side-channel blowers which are mounted inside the enclosed base, reducing the overall footprint and providing excellent safety protection. The frame, integral drip tray and control panel are manufactured from stainless steel, and a pair of clear plastic doors enable the process to be viewed without restriction.

Image(s) & Video

  • Compact design
  • Up to eight fully air knifes with unlimited positional adjustment
  • Integral drip tray for water collection and drainage
  • Clear plastic splash guarding
  • Stainless steel control panel
  • Enclosed base enhances noise suppression
  • Sleeve Length: 30mm - 400mm [1.1in - 15.7in]
  • Maximum Speed: 60MPM [200 FPM]
  • Container Height, min/max:: 50 mm/350 mm [1.97 in/13.78 in]
  • Container Diameter Min/Max: 20 mm/150mm [0.79 in/5.91 in]
  • Air: If required 35 m3 per hour at 5 Bar per nozzle
  • Air Nozzles: Up to 8
  • Electrical: 400 VAC, 3-Phase, 32 Amp
  • Weight: 575kg [1,260lbs]
  • Standard Conveyor Height: 900mm - 1000mm [34.25 - 37.8]

Contact Us For More Information