If your product line needs to be faster without sacrificing quality, Accraply’s suite of shrink sleeve application accessory machines can help.
The Accumulator, Moisture Removal System, and Twin Spool Unwind machines can all easily be incorporated into any Accraply shrink sleeve application system. They are independent modules that are then added to any new or existing lines.
Shrink Sleeve Application Accessory Machines
Learn about our catalog of shrink sleeve application accessories below. Our machines can help speed up your production line, remove moisture from the product and can store additional sleeve material.
Graham & Sleevit Accumulator
The Graham & Sleevit Accumulator accessory is designed for a high-speed line that requires non-stop production and does not already have container accumulation already built into the production line.
If you combine the Accumulator and the Twin Spool Unwind System, the Accumulator gives the machine operator more time to splice a new reel of sleeve material to the end of the old reel, and then it refills automatically.
Graham & Sleevit Moisture Removal System
The Graham & Sleevit Moisture Removal System is designed to remove moisture from the exterior surface of containers before label application. Sleeve application could be impeded by moisture on the container surface.
If your production line requires post steam-tunnel drying, the Graham & Sleevit Moisture Removal System would also be applicable. It is an independent module that can be installed on any new or existing line, pre or post-fill.
Graham & Sleevit Twin Spool Unwind
The Twin Spool Unwind accessory from Graham & Sleevit stores an additional roll of sleeve material next to the current roll being fed into the sleeve applicator. Alarms to alert the operator of low spool levels allow the process to be stopped and sleeve rolls refilled.
The Twin Spool Unwind machine can be supplied to your production line both horizontally and vertically if space is at a premium.